Peter Dragomer: RE: ANCHUTZ 9003 & 8002 conversion to FT use & power uprated to 12 lb/ft (16 joules)
Dear Sir,
I have neither rifle yet, but intend to buy either one based on your recommendation....
1) on ease of your power conversion,
2) the durability of this conversion (ie: with as little maintenance as possible of the regulator & seals), and
3) price.
4) assuming I would need to send you the rifle, what is your lead time to do the work ?
5) finally, what is the price on a silencer for the Walther LG300 Hunter ? (can you send me pics ?)
Many Thanks & Kind Regards,
Peter
October 30, 2009 4:12PM
Stefan Michelis: Hello Jon, could you please email me a price for a sidewheel for a Falcon Menace 5.5-25x50 FFP Metric 2009 and postage cost. I need a 4" sidewheel. I am from Greece.
October 24, 2009 4:33PM
corteum: Hello Jon, could you please email me a price for a sidewheel for a Nikko 10-50x60 Diamond 2008. I need a 6" sidewheel. I am from Poland. I wait your email...
October 6, 2009 12:41AM
Fab: Dear M Harris,
i'd like to buy one of your fantastic sidewheel for my riflescope with a 44 mm knob, the same diameter as the hawke sidewider i think.
Thanks in advance, i'm waiting for your mail
Cheers
Fab
August 11, 2009 10:40AM
airgunft: Hi Jon,
I'm in Portugal and I need two sidewheels, one for a 2007 model Nikko 10-50x60 and the other one for a 2008 model.
I'm waiting for your email
Thank's
June 23, 2009 6:45AM
Victor: Hi. I need a big sidewheel for a new Nikko 10-50x60 Diamond 2008. I am in Spain. I wait your email...
June 20, 2009 3:35PM
rlang: hi jon
i have answer to your email about the sidewheel,
but since, no news from you.
could you email me to confirm your adress
Thanks
Robert
April 1, 2009 7:17PM
Ronaldjaye: Mr. Harris Is there a chance you might make a large sidewheel for a Nikko Stirling nighteater 4-16X44
March 27, 2009 7:30PM
rlang: hi Mr Harris,
i'm french so i appologize for my terrible english.
I have a Nikko Stirling platinium 10-50x60 and i need a 5" sidewheel.
I have an AA EV2 MKII and i would like to have a silencer for it.
Could you contact me. Thank you.
regards
Robert
March 3, 2009 9:44PM
Mimmo Roscigno: Hi Mr Harris
i should need a couple of scope riser blocks for my p70,that i have seen on your website;i would receive some information about, are these bolcks compensated in inclination?Please let me know the price and payment conditions.
Best regards
February 18, 2009 3:56PM
cjaa: Mr Harris, I have a Nikko Stirling and need a new 5" sidewheel. Could you contact me. Thank you.
February 2, 2009 4:45PM
JB Gesler: Jon
I too am looking for a 5 inch side wheel and a 30mm marker for a 2008 Niko Stirling. Please contact me at your convenience.
January 20, 2009 3:48PM
Brian: Hello Jon,
I am interested in a butt hook adaptor for my EVII Mk2, to fit on to the bottom section of the standard butt hook currently provided.
What do you propose?
Thank you.
Brian Wood
January 9, 2009 2:32PM
Justin Wood: Hello Jon,
Please can I ask do you produce a side wheel for the New Nikko 10 x 50 x 60 2008 shorter body model, and in your view would this be an advantage for FT shooting with range finding the longer distances of 50 - 55 yds?
Many thanks,
Justin
December 22, 2008 12:22AM
Dale: Would like to purchase sidewheel for nikko 10-50x60
could you shoot me a price list and availability please.
thank you.
December 12, 2008 2:19PM
griggzz: hi love the sidewheels i really want 1 for my nikko nighteater 10-50x60 i want 1 asap so if these are avalible can you email me please ...... skininka@hotmail.co.uk
cheers
December 1, 2008 2:09PM
JD: Dear Mr. Harris,
I am looking for a sidewheel and top turret for the Nikko 10-50x60.
Could you please contact me@remorfer@(place extremely warm mail here dot company) for pricing, lead times including shipping to Belgium.
Thank you very much in advance,
JD
November 26, 2008 2:07AM
frank van diemen: maybe you have some pictures to choose from?
October 28, 2008 1:31PM
frank van diemen: dear mr harris;
i am looking for a silencer for both my airguns,a walther lg300 alutec dominator and the new aa ev2 mk2. they have to be as quiet as possible.would you be so kind to give me some options and if possible prices for these silencers?(just silencers or the one for the aa like in your gallery with the carbon sleeve).if you can make me these silencers,can you give me an estimate of delivery after ordering?
Kind regards;F.van diemen (netherlands)
October 28, 2008 1:28PM
trommauri: Jon, your works are fantastic please let me know if you have one for my Nikko Stearling 10X50X60.I hope you can send one of that beautiful wheel in Italy also. Ciao and thanks. trommauri@yahoo.it
October 26, 2008 11:44AM
Dale Keith: Nice Site. I need a side wheel for a Nikko 10X50X60. I am in the US. Can this happen???
Thank You.
August 20, 2008 9:17PM
benji: Hi jon, im looking to get a sidewheel for my hawke mil-pro 10-50x56, could you please get back to me with some prices. many thanks Ben
June 25, 2008 2:05PM
Sergio: Mr Harris,
I need a Nikko Stirling sidewheel.
Could you contact me.
Thank you.
June 10, 2008 5:32PM
serge: Hello Mr Harris , I'm looking for a Leupold 20-50 for FT, maybe you can help me to get Leupold. Would you send me an e-mail about the price and posibility to deliver Leopold to Lithuania
thanks
Serge
p.s.
I am from Lithuania (Vilnius)
March 23, 2008 3:27PM
D Polinder: Hi Mr Harris ,
I'm looking for a sidewheel marker,for a 30mm tube,hope you can help me with that.
Would you send me an e-mail about the price ,thanks
regards D Polinder
March 21, 2008 11:30AM
david: Hi sir,
Beautifull things you make.
Did you ever made a moderator to put on the HW97k.
Would like to remove the barrel weight and put on a moderator to dampen the noice.
Any suggestions?
I don't want to make the gun any longer or more muzzle heavy.
Shipping to Belgium?
Thanks David
July 7, 2007 7:15AM
Franky: Hi Mr. Harris,
I would like to purchase a sidewheel for my Leapers 4-16*56 scope.
Can you please let me know the cost including the shipping cost to Italy.
You can contact me @ russofra1@hotmail.com
Thanks.
Kind regards,
Francesco Russo
April 27, 2007 4:42AM
Ian Cox: Hi
I'm after a large top turret for a Nikko 10 x 50 x 60,
Hope you can help
ian@icssjoinery.orangehome.co.uk
Best Regards
Ian
November 15, 2006 10:50AM
Randy: I am interested in buying a side wheel for a Niko & a Rex. Can you please e-mail me about pricing and Details. Your work is fantastic...
November 14, 2006 7:14PM
alfred westwell: hi john.could you please e-mail me about a wheel for
a richter optic 4-16x50e-sf and the price thank you . alfred westwell.
November 6, 2006 5:48AM
Jeff Paddock: John could you email me about a wheel for a Leupold COmp 35X.
Thanks
Jeff
July 20, 2006 3:03PM
Duncan Arrowsmith: Hello Jon, could you please email me a price for a sidewheel for a Hawke Sidewinder and also a muzzle brake for and AA S400
Many thanks.
February 20, 2006 2:54PM
Shane: Hi Jon, Havent heard anything from you in a while, reference the Steyr LG 110 FT Silencer, You said that it would be ready for about now? Please keep in touch, Shane
January 19, 2006 5:12PM
Shane: Hi, I have purchased an oversized side wheel for DMP Scope from you last year, and I was extremely pleased.. Would there be any chance of commissioning another piece of work from you? What im after this time, is a silencer for my Steyr LG 110 FT, so that I could use it for hunting... One similar to the one shown on your picture trail web site would be awesome. Could you help?
How much would it cost..?
Many thanks again, for your time.. Shane
January 8, 2006 4:26AM
jon flavell: Hi there i am very interested in purchesing a custom side-wheel for my leapers Swat and my Nighteater scope. Can you please mail me.
jonflavell@hotmail.com
Regards
jonf
August 21, 2005 2:48AM
Piers: John, I'd like to purchase a sidewheel for Nikko 10-50x60 scopes and a moderator/muzzle break for an Ev2. Please contact me. Regards
June 25, 2005 1:32PM
Yoeri: Hello John,
I am looking for a 5 inch sidewheel for my Deben DMP. Please contact me.
June 15, 2005 2:45AM
John: Hi Jon
I'd like to purchase a nice wheel for my Nikko 10-50x60 can you please contact me, thanks !
John.
May 25, 2005 9:03AM
Carl Johnson: Jon,
I'd like to purchase a rear vented bead blasted silencer for my Air Arms EV2. Like the one you made for Mario. Please e-mail me at cjcjaj@comcast.net
Thanks,
Carl
March 26, 2005 4:12AM
Brian Barnes: I just saw what you did for an EV2. Can you give me a price for the sidewheel for a Nikko Stirling 10-50x60 and moderator for mine?
Brian
February 25, 2005 3:42AM
jim bicknell: jon could you supply me with a side wheel for a leupold competition 35mag scope thanks
February 1, 2005 1:57PM
Jeff Jones: Hi Jon
Jeff in Norwich again.
Would like two 5" sidewheels
another one like before for another deben 10-50x56 silver again
And one for my deben mil pro although this one in black. Can you get back to me with a price for the 2 please.
Cheers
Jeff
January 28, 2005 10:36AM
ChrisLK: Hi, I am interested in a side slotted muzzle brake for my Steyr LG100HP. How much is it?
ChrisLK
December 29, 2004 4:31PM
CLEM: Excellent site !
Products look fantastic.
I have e-mailed regarding purchasing a wheel for my Nikko Stirling 10-50x60, hope you can accomodate !!
look forward to hearing form you,
CLEM
November 29, 2004 1:41AM
stephen davies: deben/hako 5 1/2" diameter sidewheel and marker/pointer. with six large ballon shaped holes/six 1/8" holes. an six 14mm holes. and the band polised and the rest bead blasted. and the cost an how to order it thank alot
September 24, 2004 2:47PM
ernst: hello,
i have got an theoben mfr i wanted to ask if you can make me a nice silencer for this mfr ore muzzle break, and if you also can tune this mfr it is already fac?
ernst
September 19, 2004 4:08AM
stephen davies: what size wheels do you do and prices for a deben 10-50x56 high mag
thanks
August 30, 2004 10:56AM
Bill Thanel: I am just getting into PCP FT. May be needing a sidewheel when I pick up my USFT from MAC-1 in January. Keep up the good work. FT rules.
William Thanel
WThanel@yahoo.com
Southern CA
USA
July 28, 2004 8:35PM
Shane: Hi John, On top of my 'demands' a few messages ago. could you please quote a price for a for a Leupold Tactical Riflescope 8.5-25X50, 5 1/4" Sidewheel + extra 12 holes and Marker polished, bead blasted and anodised black. many thanks.
May 23, 2004 4:18AM
steve fleetwood: Could you pls send prices for the following & how to order
Ali butt pad for Daystate Mk111
6" side wheel & larger top turret for Nikko 10-50*60
Regards
Steve
May 9, 2004 12:58PM
Shane: Hi im interested in your aluminium butt pad the one showing achievable cant, could you please send me a price, for making this to fit my Daystate mk III. Would it be poss to coat it in satin black. your help would be much appreciated.shane
May 9, 2004 9:27AM
Brian Haslam: I`m interested in your black side wheels
May 7, 2004 10:46PM
Jack: Very nice work mate.
March 26, 2004 1:39PM
Peter Dormer: Hi Jon, Jeff from norwich gave me your contact.can you give me a price for a side wheel for a Deben Hawke Mil - Pro 52 MM, Model MP6. 5-26x52 scope. Black Matt 4 1/2" or 5" regards Peter.
March 14, 2004 10:45AM
Jeff Jones: Hi Jon
Had a custom sidewheel off you a couple of weeks ago. Was wondering if you do anything like an adjustable palm/knee rest for a pro target.
if you do can you send me some pics please.
regards
Jeff
March 7, 2004 2:10PM
Jeff Jones: Hi
Am looking to purchase a 5" sidewheel for my Deben 10x50x56 and also a larger top turret can you please advise me of the price. would like if possible them done in Alloy
January 27, 2004 10:55AM
Michal Maslowski: Hi,
Iam interesting in buying the side focus whell for leupold Premiere 18x-40x. what is the price and possibility of shipment to Warsaw, Poland.
Regards,
Michal Maslowski
January 2, 2004 1:22AM
Bill Worsley: Great Pics, will be back for a sidewheel when I get my Leupold
Bill W
November 6, 2003 1:04AM
single shot: LOOKS A TOP CLASS PRODUCT
NOW HOW DO I ORDER A 4 1/2" ALUMINIUM SIDE WHEEL FOR MY DEBEN 10-50 MIL DOT??
CAN'T SEEM TO FIND YOU WEB SITE
October 13, 2003 7:50AM
Art of Shooting,Fishing & Sports Fabprints: You have a very interesting site-FAB!! Paul H.
( http://www.geocities.com/ukfabarts/GAME.html )
September 24, 2003 5:34AM
Daystate: A top class product, beautifully engineered at a great price:- highly recommended.
Tony Belas
Daystate Small Arms Ltd
July 9, 2003 7:57AM
Mike B: Hi John
Reached this site via the Airgun BBS, hoping to spot something suggesting a sidewheel for the Deben Milpro was available. Apparently you do make them .... and very well too.
Three little questions : Will these fit the MilPro 6.5-26x52?; Is it easy to fit/replace with 'standard' wheel (also used for hunting)?; and How much?
Hope to hear from you.
July 7, 2003 4:19PM
Lars: Jon your side wheels etc are the business keep it up, looking forward to seeing how nice the muzzle break turns out to be and thanks so much again i will have to recomend you to others i know,
All The Very Best
Lars
June 2, 2003 6:03PM
Fred Vollmer: Do you have the Blue Tasco/Deben in stock? I have a 10x25 power taso custom shop. I assume shafts all the same. How much with PO added.
I have visa, PayPal or can mail.
Thanks Fred
April 16, 2003 8:57AM
nigel: sorry forgot do you do pointers to read off the distance mark on the sidewheel
March 17, 2003 7:09PM
Nigel: interested in a sidewheel for a hako 8-32x56 please email me
nigel_joe@yahoo.co.uk
if you could with prices if possible like the pictures of your work
March 17, 2003 7:01PM
jim aka boltaction: nice site jon, hope you do well with it.
rgds
jim
March 3, 2003 3:06AM
Emma Louise: I have two words for you Mr Harris...
Very Professional!! - good job mate!
February 22, 2003 11:43AM
tomo: where do ibuy arusty gun ....???
January 19, 2003 12:49PM
Fred Vollmer: Am interested in price on the 3 pc wheel for Tasco custom shop scope. Fred
January 13, 2003 7:23AM
Ken Hughes: Nice looking pieces of work Mr Harris. Thanks for taking the time to post them so we could enjoy them. Ken Hughes
December 6, 2002 8:52PM
Smitty: Nice Pics, Jon!!! Am also working on a homebuilt... but first need to make space in the garage for the lathe and mill-- gettin' there...
November 5, 2002 3:13PM
|
|
