Monty Schmitz: I have, over the past several years dabbled in woodcarving and subscribed to Woodcarving Illustrated magazine.
.
Have enjoyed your articles and gained many insights that are helpful to me.
.
I, when power carving crosses that I designed using the computer paint program need an exhaust system.
I was glad to find your "PictureTrail-online photo albums" web site and find your exhaust system.
I, with your permission, intend to build an exhaust system similar to yours. I don't have a shop so will have to do a modification to make it portable.
February 21, 2008 10:22AM
Lloyd Balch: nice and thanks for the contact in medon [jackson area] look forward to joining the club. as i am a snow bird and go to south texas in the valley it will be short this year but will be looking forward to ti next year also
thanks'
Lloyd
August 15, 2006 8:26PM
thomasperrin: your carvings are wonderful, i wash i was half as good.
great site. and plenty of things to keep up a carvers intrest
i really like your power carving station, if you have time to drop me a line on how its constructed i would appricate it
February 9, 2006 8:46AM
Gordon D Rosser: I enjoyed viewing your work and hope to someday be able to carve and create so successfully as you have. Thank you for sharing.
October 11, 2005 2:14PM
Dave Brogan: Hey Don, it's your pal Dave from the Leiper's Fork Carving Club. What an enjoyable Website! It's almost like visiting with you in person except there's more patterns! Hope you're enjoying yourself on the road this summer, we miss you at the club meetings. I finally 'finished' that chain and ball & cage I was working on at the TACA Crafts Fair. I could (and probably will) spend a few more hours cleaning it up and applying a finish but all the links are done, the ball is round and still inside the cage and I still have all my fingers! Hope to see you at the club's carving show this fall, if not before. Take care on the road, I hear there's a lot of loose women out there!
Later,
Dave
June 15, 2005 7:15PM
Bob Bennett: Hello
I am a friend of Fritz Polands and he sends his greeting! I am also the director of the Dover Woodcarving Show that is a tribute to Moony Warther. I really appreciate the effort you have made on your website. Fritz showed me a book you put together on carving characters of people you know. I did not find a way to order it from you. How can i do this?
March 3, 2005 4:39PM
Baliqui.com: Bali Handicraft Wholesale Bali Handicraft, Bali Statue, Bali mask, Wholesale Bali Handicraft, Bali Sterling Silver Wholesale, Bali Handicraft supplier, Wholesale Bali Silver Jewelry. Visit www.baliqui.com to see our catalog and price list.
February 5, 2005 9:52AM
RALPH HERRMANN: Hi.DON
Great web site,seen Sandy at the meeting last night.You will never become a dirty old man with a web site like this.Krrp up the good work.
RALPH
January 21, 2005 5:46AM
Bill T Smith: great work n its outstandin n also great lookin too
October 31, 2004 9:34PM
Thomas W. Horton: You have to be one of the most enthusiastic carvers. Love your shop and all its' fixins'. Yep, just had to go thru all your pictures and enjoyed my visit a great deal.
You have helped my interest. Even after carving a few years, my carvings are anything but good. But, viewing your site, will have to keep trying. Need more practice.
Thanks again for your site and sharing it with everyone.
October 10, 2004 8:51AM
Bill Lees: Don--thanx for the welcome to the purch and the links to your site. I enjoyed it. You crank out quite a bit of production. I really like the expressiveness of your pieces and also thanx for the tips. They will come in handy as I will keep that marked for future reference.
March 11, 2004 10:03PM
Bub Sutton: Its a great web site, keep up the good work and make them chips fly till dooms day.
October 10, 2003 12:45PM
Lauren McAllister: very nice you gave me some ideas........
September 30, 2003 6:34PM
Gord Smith:
August 11, 2003 7:05PM
Karen Boyle: Hi Don,
I hope you realize how important you are to we beginning carvers. I've been carving close to 1 year now, and can't tell you how many times I have gone to your sites for help and always found it. Thanks again for your graciousness.
Karen
March 19, 2003 12:49PM
Wm. Earl Gray: Hi Don
I've seen most of the carvings (I think) and wish I could come close to your achievments with a knife. They're all Great! Thanks. but the shop still fascinates me the most!
March 18, 2003 6:58AM
Thad Hammett: Enjoyed looking Don, some nice work there.
Thad
January 12, 2003 10:44AM
Don Woodard: Thank you for the photos of your dust collection system. I create relief carvings and do use a dremel for some of the work. If you would like, you may see my work in the woodcarving artist section of my website at www.donwoodard.com
Thank you
Don
December 29, 2002 8:26AM
Ivan Whillock: I'll resist a smart-aleck bobble-head comment. Lookin' good, Don. Both of you!
November 24, 2002 2:56PM
Woodbutcher Jan: Love that carving of *Woble head
But it SURE was great to see your smiling face
Hope things are looking up for ya
W.B.Jan
November 24, 2002 1:12PM
john woodnut (GB): its ashame you dont live in the uk magic web page
September 28, 2002 10:03AM
Merry Axtell: Your tutorial on the head & hands is very helpful. Thanks for sharing.
I was very interested in your dust collection system. It looked like it must work very well.
July 31, 2002 3:29AM
Larry Mattson: Thanks so much for the great tutorials. Your efforts are really appreciated!
Larry in Orlando
June 24, 2002 6:30AM
Bob Fien: Lookin good !
December 25, 2001 5:58AM
Loren Woodard: Don:
Thanks for posting the information on heads and hands. I appreciate your thoughtfulness!
Loren Woodard
December 19, 2001 8:13PM
WOODBUTCHER JAN: Thanks ol'Don for this great lay out
very clear
hope you don't mind me running some copies for my students
Thanks again W B Jan
December 19, 2001 4:44AM
Jim Wilson: Hi Don;
I appreciate you taking time to share the face carving information. My wife is sculpting her own dolls for future porcelain originals and your carving and proportion sheets are very helpful!
Jim
December 18, 2001 5:00PM
BILL R: thank you for the laying out faces artical.will be a big help.
December 12, 2001 5:58PM
|
|
